Back to Our Work
Bodywork and refinishing

2007 Dodge Ram 3500 Welding Truck

We replaced the doors and rocker panels and refinished the welding deck as part of the Ram’s makeover.

Project process

  1. Cab prep and paint

    With the doors off and the glass and interior masked, the cab went from primer to a fresh black finish in the booth.

    Masked Ram cab with primer around the door openings Fresh black finish on the cab and door jambs
  2. New doors and rockers

    The replacement doors and rockers are in place. The front panels and welding deck are still off in this shop photo.

    Black Ram cab with the doors fitted and the front body panels and deck off
  3. Refinishing the welding deck

    With the welding deck off the truck, the deck and compartment doors were refinished separately. The black finish is shown before reinstallation.

    Welding deck on the lift with compartment doors on stands Refinished black welding deck on the lift
  4. Frame and reassembly

    The rear frame is visible with the deck off. The next photo shows the deck back on while work continued on the front end.

    Black-coated rear frame rails exposed with the welding deck removed Ram with the welding deck back in place and the grille and headlights still off
  5. Finished in the shop

    Two angles show the black cab, reassembled front end and refinished welding deck together.

    Finished black welding truck seen from the driver’s side Low front view of the completed Ram in the shop
  6. Outside Whiteball

    The completed 2007 Dodge Ram 3500 outside Whiteball Autobody & Paint in Cold Lake.

    Finished welding truck outside the Whiteball shop and sign